CONSOLIDATED BEARING 6308 M C/4 Single Row Ball Bearings

Mass adapter sleeve assembly:0.19 kg; B:13 mm; d1:31.75 mm; G:M 40x1.5; B1:36 mm; d:40 mm; Lock nut:KMFE 8; d3:58 mm;

Ca:117.805 mm; Appropriate attachment bolt size G:1.5 in; R1:130.175 mm; Max. speed for PosiTrac Plus seal:725 r/min; J1:133.35 mm; Adapter sleeve assembly:SNW 44x7.13/16; Cap bolt recommended tightening torque:4284.4 N·m; Cap bolt:1 1/2-6 UNC; da:198.438 mm; Initial grease fill:2749.95 g;

Basic Static Radial Load Rating Co:125000 N; Basic Dynamic Radial Load Rating C:163000 N; D:200.0000 mm; Oil Speed Rating Open/Shielded n2:4000 rpm; Sealed Speed Rating n3:2300 rpm; Fillet Radius ra:2.50 mm; d:80.000 mm; Accessories:Two Shields & Snap-R; Grease Speed Rating Open/Shielded n1:3400 rpm

Oil Speed Rating n2:5000 rpm; d:55.000 mm; B:52.40 mm; Accessories:One Seal & Snap-Ring; D:120.0000 mm; Basic Dynamic Radial Load Rating C:106000 N; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:81500 N; Grease Speed Rating n1:3800 rpm; Sealed Speed Rating n3:3800 rpm;

Bearing:22228 CCK/W33; Max. speed for Taconite seal:625 r/min; R1:87.313 mm; A1:149.225 mm; RG:3/4 NPT; Adapter sleeve assembly:SNW 28x4.15/16; P90°:180 kN; Initial grease fill:481.95 g; Cap bolt:7/8-9 UNC; Cap bolt, SAE grade:8;

B:335 mm; Da min.:1788 mm; Misalignment factor k1:0; Da max.:1916 mm; Fatigue load limit Pu:2400 kN; r1,2 min.:9.5 mm; d:1500 mm; D1 ≈:1831 mm; Basic dynamic load rating C:19600 kN; ra max.:8 mm;

Tolerance housing:H7; Mass bushing:0.02 kg; B:16 mm; Coefficient of friction µ max.:0.1; Coefficient of friction µ min.:0.05; Permissible sliding velocity v max.:5 m/s; Permissible sliding velocity v min.:0.25 m/s; Tolerance shaft:h8; Specific static load factor K0:20 N/mm²; Specifi

Lock nut:HM 56 T; Ca:166 mm; P55°:5000 kN; Cap bolt, rec. tightening torque:400 N·m; bc:154.5 mm; L:790 mm; db:300 mm; Initial grease fill, 20%:2.9 kg; Labyrinth seal:2 x TS 64; N:50 mm;

C:450 mm; Fatigue load limit Pu:1460 kN; D:620 mm; Mass bearing:420 kg; d:440 mm; b:13.9 mm; Design variant/feature:BC4.18/W33GWI; D1 ≈:557 mm; r3,4 min.:6 mm; B:470 mm;

r1s (min):0.6 mm; Dynamic (Cr):14.691 kN; Oil:15 000 min-1; Static (Cor):7.645 kN; D:47 mm; B:14 mm; Pu:0.348 kN; d:20 mm; rs (min):1 mm; Grease:12 600 min-1;

C1 max.:43 mm; d2 max.:162 mm; dk:92 mm; Basic dynamic load rating C:880 kN; d:70 mm; l4 max.:284 mm; α:6 °; l5 ≈:40 mm; G:M 56x4; h1:200 mm;

das:25.6 mm; d1 ≈:28.4 mm; D1 ≈:33.2 mm; da min.:23.2 mm; B:30 mm; D:42 mm; Calculation factor kr:0.5; Limiting speed:10000 r/min; rb max.:0.3 mm; r3,4 min.:0.3 mm;

J min.:108 mm; Thread grub screw G2:1/4-28 UNF; J6:140 mm; B:38.1 mm; Recommended tightening torque for grub screw:4 N·m; A:40 mm; Recommended diameter for attachment bolts, inch G:0.5 in; Limiting speed:1200 r/min; Bearing:YARAG 206-103; H:82 mm;

C:80 mm; Basic static load rating C0:1800 kN; D:380 mm; Limiting speed:1300 r/min; ra max.:2 mm; Reference speed:1100 r/min; Da max.:369 mm; Radial shaft seal:Available on request; r1,2 min.:2.1 mm; Mass bearing:12.7 kg;

Bearing designation:3311  ; ra:2 max; Weight:2.48 kg; d:55  ; da:65 min; Pu:4.909 kN; a:80 mm; rs (min):2 mm; Grease:3 300 min-1; D:120 mm;